NB IoT Standalone BER/BLER
No ratings yet
Version 1.0.0.19
Description
The NB IoT Standalone BER/BLER is an add-on to GTT NB IoT Toolkit for decoding and BER/BLER analysis. For more information, see the GefleTestteknik Homepage.

Installation:
NOTE: To avoid issues with Windows access rights, make sure to start VIPM with admin righs (right click and select "Run as administrator") before starting this installer. VIPM 2017 or later is required to install this package.

The VIs are installed to [ProgramFiles]\\National Instruments\\[LabviewInstallDir]\\vi.lib\\GefleTestteknik

Hardware and SW Requirements:

HW requirements:
NI PXIe-1082 chassis (or similar)
NI PXIe-8135 Controller (or similar)
NI PXIe-5644R (or similar)

SW requirements:
Description Version (or newer)
NI Spectral Measurements Toolkit >=2.7
NI Modulation Toolkit >=4.4
NI-RFSA >=14.1
NI-RFSG >=14.0.1
NI Third Party Licensing & Activation Toolkit >=2014
VI Package Manager >=2017

See http://testteknik.se/

Copyright
? 2015 Gefle Testteknik AB. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of Gefle Testteknik AB.
Note:
The GSM/EDGE Signal Generation Toolkit, the NI WCDMA/HSPA + Measurement Suite, the NI LTE Toolkit, the NI CDMA2000 & EV-DO API and the RBS Toolkit (with support for GSM, WCDMA, LTE-FDD and LTE-TDD) which are incorporated into the GTT RBS Test Suite, are the property of National Instruments Corporation. Copyright ? 2014 National Instruments Corporation. All Rights Reserved.

GEFLE TESTTEKNIK RESPECTS THE INTELLECTUAL PROPERTY OF OTHERS, AND WE ASK OUR USERS TO DO THE SAME. GEFLE TESTTEKNIK IS PROTECTED BY COPYRIGHT AND OTHER INTELLECTUAL PROPERTY LAWS.
Release Notes
                    1.0.0: First release
Downloads
0
Categories
 
Tags
 
Release date
February 2, 2018
Version history
1.0.0.19